Empire Comfort Systems CP Owner's Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
30067-0-0512 Page 7
HowtoTurntheFireplaceOff
To turn the replace off, simply switch the burner switch or switches
to the “OFF” position, turn the remote off, or adjust the temperature
set point down. The burners will instantly go off, but the circulating
blower will still operate until the heater cools off. It is normal for the
blower to turn on and off while it is cooling down.
HowtoOperateEconomyMode
When operating the replace with the remote thermostat, the re-
mote operation of the front burner my be over-ridden and made to
operate continuously. To activate the Economy Mode, verify the
burner switches are in the “ON” position. Press and release the
red button that is located next to the burner switches. The button
will illuminate indicating that the Economy Mode is active.
The front burner will activate and will remain on as long as the
button is illuminated and the burner switch remains in the “ON”
position. The rear burner will cycle with the remote.
To deactivate the Economy Mode, press and release the red but-
ton. The button will no longer be illuminated, indicating that the
Economy Mode is no longer active.
RemoteTransmitterandReceiver
The remote control transmitter operates on (2) 1.5V AAA batteries.
It is recommended that ALKALINE batteries be used for maximum
battery life and maximum operational performance.
RemoteButtons
ON Button - Turns replace manually ON.
OFF Button- Turns replace manually OFF.
MODE Button- Changes remote from manual mode to thermostat
mode.
SET Button- Adjusts temperature setting in thermostat mode.
RemoteDisplay
1. DISPLAY Indicates current room temperature.
2. °F OR °C
Indicates current temperature units in de-
grees Fahrenheit or Celsius.
3. FLAME Indicates burner/valve in operation.
4. ROOM Indicates remote is in Thermostatic mode.
5. TEMP
Indicates that display is showing tempera-
ture reading.
6. SET
Appears during the setting of the desired
temperature for the Thermostatic mode.
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments